SILICON CARBIDE AS FILLER IN INDUSTRIAL EPOXY
Silicon Carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke.with high strength, high hardness, wear resistance, corrosion resistance, oxidation resistance, high thermal conductivity, good high temperature stability, low linear expansion coefficient, strong chemical corrosion resistance, etc
| Description | SILICON CARBIDE | ||
| SiC | 97.5-99.5% | ||
| Fe2O3 | ≤0.40% | ||
| F.C | ≤0.20% | ||
| Melting point(℃) | 2250 | ||
| Maximum service temperature (℃) | 1900 | ||
| Specific Gravity | 3.20g/cm3 | ||
| Kohs Hardness | 9.15 | ||
| APPLICATION | 1，Refractory,Furnace Burden,Castable,Ramming Compoynd,Refractory Bricks etc 2，Blasting,surface Treatment,Rust Removal 3，Cusmetics products manufacturing,Beauty crafts and Dermabrasion etc 4，Ceramic products such as ceramic filter etc 5，Grinding wheels,sandpaper etc 6，Glaze,floor coating,Floor / Wall Laminates 7，raw material of Knife Grinder,Whetstone,oilstone,grinding stone,abrasive stones and so on 8，Used to produce Polishing wax,polishing fluid,grinding powder,grinding fluid and so on 9，Wear-resisting floor 10，Brake linings 11.Industrial Lubricant 12.Filler in industrial epoxy | ||
| Production Sizes | Macrogrit | JIS | #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 |
| FEPA | F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 | ||
| Micropowder | JIS | #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 | |
| FEPA | F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 | ||
| M | 4# 3# M28 M20 M14 M10 M7 M5 | ||
PACKING
 |  |  |  |
| 25KGS PVC BAGS | 1MT BIG BAG | 25KGS PVC BAGS+1MT BIG BAG | 25KGS PVC BAGS+PALLET |
